-40%
W2ENY OPC-118 13 for Icom 7000 7100 7200 7300 7410 706 718 IC-2KL AT-500 AT-100
W2ENY OPC-118 13 for Icom 7000 7100 7200 7300 7410 706 718 IC-2KL AT-500 AT-100
W2ENY OPC-118 13 for Icom 7000 7100 7200 7300 7410 706 718 IC-2KL AT-500 AT-100
W2ENY OPC-118 13 for Icom 7000 7100 7200 7300 7410 706 718 IC-2KL AT-500 AT-100
W2ENY OPC-118 13 for Icom 7000 7100 7200 7300 7410 706 718 IC-2KL AT-500 AT-100
W2ENY OPC-118 13 for Icom 7000 7100 7200 7300 7410 706 718 IC-2KL AT-500 AT-100

W2ENY OPC-118 13 for Icom 7000 7100 7200 7300 7410 706 718 IC-2KL AT-500 AT-100

$ 22.17

Availability: 25 in stock
  • Type: W2ENY
  • Compatible Brand: See details in the listing, For Icom
  • Brand: W2ENY
  • Condition: New

    Description

    Icom Amplifier/Tuner Interface
    OPC-118a
    by Bob W2ENY
    The Icom 7300, 7200, 7100, 7000 (see manual p. 140), 703 and 706 refer to a OPC-118 adapter in their manual for interfacing to the AT-100, AT-500 tuner and IC-2KL amplifier... But this cable was never made with a 13 pin connector!
    This is another unique accessory that I developed to interface Icom equipment. Works with the AT-100, AT-500, IC-2KL and 7410/7300/7200/7100/7000/703/706 transceiver using the DIN type accessory jack on the back of the radio.
    Using your ACC jack, this interface passes all necessary control voltages to the amp for ALC, T/R keying and auto-bandswitching. Just like Icom designed it. They just don't support it anymore...
    The cable here is shielded and 4 feet long, so you can connect directly between the radio and amplifier or tuner. As I recall, Icom had you buying two cables to solve this solution.
    If you have an ICOM 7000, 7100, 7200, 7300, 703 or 706 and AT-100, AT-500 or IC-2KL amplifier, this is what you need!
    Better deals at w 2 e n y * c o m
    Thanks for looking!
    Add a map to your own listings. FREE Trial!