Paintless Dent Repair Removal Puller Auto Kits Car Hail Damage Dent Hammer Tools

Description

Product Description
Paintless Dent Repair Removal Puller Auto Kits Car Hail Damage Dent Hammer Tools
About Golden Dent Lifter:
1.Aluminum body
2.Stainless Steel Adjustment knob
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4.One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5.With sandblasting oxidation process, the smooth texture feels and outstanding looks, The product is very strong and durable.
6.On the bottom of the dent lifter is silicone, not ordinary rubber, which is very soft and not harmful for oil paint and can be torn down.
Note:
1.Use adjustable lifting-mode movable tripod puller and adjust it against the size of the dent.
2.During operation, you need to adjust your force gradually until the position where the dent is located is pulled to the flat and recovered entirely.
3.The Dent Lifter squeeze trigger will allow you to control and massage door dings and hail damage until the desired results are achieved.
4.New material and new design, stronger material.
About Rubber
Hammer & Mini Nylon Knock Pen Repair Set:
Features:
√
Suit for all kinds of flat metal dent
- such as the surface of automobile metal plate and the washing machine's metal plate
√
Avoid Scratches
- A versatile tool with detachable ends. Plastic and metal faces. If you work with metals, you will need a hammer with rubber and plastic heads to avoid scratches.
√
Stable And Smooth
- Lightweight tubular steel handle shifts the weight balance toward head for extra power in each blow.
√
Anti Slip
- Extra soft, non-slip rubber handle grip for ultimate comfort and control.
√
Perfect Selection
- Handle made of steel, with ergonomic design, comfort grip, suitable for prolonged use
About 20 W Mini Glue Gun:
Material: Plastic & Aluminum
Working power: 20 W
Working voltage: 100 to 240 V
Working temperature: 356 to 392
Nozzle diameter: 0.070-0.078 inch
Warm-up time: 3-5 minutes
Cable length: 55 inch
Size: 5.1 inch*4.3 inch*1 inch
Color: Blue
Warm Prompt
:
1. Keep clean of the glue sticks to avoid impurity block the nozzle, and do not pull out of the remanent glue sticks after each time using.
2. To avoid get an electric shock during use, do not use it in humid
environment and keep it away from children.
3. The remaining pressure inside the glue gun will push a little molten glue out of the gun even stop use, so to save your glue,
please control release the trigger or cut off the power in advance.
4. Cut off the power when stop using, and never try to disassemble the glue gun in any case.
Package List:
A
:
1 x G
olden Metal Dent Lifter
1 x Red T Bar
1 x Mini Glue Gun
18 x Glue Tabs
5 x Mini Yellow Glue Sticks
5 x Mini Black Glue Sticks
1 x Alcohol Bottle
1 x Rubber Shovel
1 x Cleaning Cloth
B
:
1 ×
Golden Metal Dent Lifter
5 × Mini Yellow Glue Sticks
18 × Glue Tabs
C:
1 x Mini Glue Gun
5 x Mini Yellow Glue Sticks
5 x Mini Black Glue Sticks
Step-By-Step Instructions for Repairing Car Paintless Dent
1. Prep tabs by soaking them in 91% rubbing alcohol and drying them before first use.
2. Insert a glue stick into the glue gun. Plug in the glue gun and allow it to heat up for 5 minutes.
3. Clean the area to be repaired with 91% isopropyl rubbing alcohol and a clean towel.
4. Select the correct sized dent pulling tab by comparing it to the size of the dent.
5. To save time when doing multiple repairs, glue and place all of the tabs at once on the vehicle, then do all of the repairs.
6. Apply hot glue to the dent pulling tab by pulling on the trigger of the glue gun until approximately a dime sized amount of glue is released. Use a pea sized drop of glue for smaller tabs and a dime size or slightly more for larger tabs.
7. Apply the dent pulling tab to the exact center of the dent.
8. Allow the glue to set for about 5 minutes. The glue should be hard to the touch at the time you begin repair.
9. Slide the dent lifter device directly over the dent pulling tab shaft until the female adapter in the center of the dent lifter slides over the shaft of the tab. Adjust the height knob accordingly.
9a
. The T-Hand Puller may be used for larger dents or to remove the last 10-20%of a dent.
10. Squeeze the dent lifter handle slowly several times until the desired result is achieved. As the damage gets smaller, reduce the size of the dent pulling tab until the dent becomes flush.
11. Spray 91% rubbing alcohol on the edge of the glue and peel it away using the plastic scraper. .
12. If a high spot is created, gently tap down any high spots using the dent hammer and the plastic tap down tool provided, until the dent is flush.
We offer a triple guarantee 100% Back Guarantee:
1. If you're not 100% happy with it, ship it back and we will refund your money.
2. If any part breaks or is damaged, ship it back and we will replace it for free.
3. If you ever lose the product, just let us know and we will ship you out another one for free!
We have free shipping and shipping fast!
If you have any questions, please leave us a message, we will reply as soon as possible.
If you like our products, just add to your cart.