Paintless Dent Repair Dint Hail Damage Remover Lifter Car Repair Dent Puller

Description

Packing List
( Only one dent puller, no other things)
1X Golden Dent Puller
Golden Dent Puller
1.
Material: stainless steel +
Aluminum body
+
plastic
2.Stainless Steel Adjustment knob
3.Stainless Steel Nuts/Bolts/Pivot pin/E-Retaining clips
4.One screw on the top of the dent lifter is used to adjust the middle height of the dent lifter.
5.With sandblasting oxidation process, smooth texture feel and outstanding looks, The product is very strong and durable.
6.On the bottom of the dent lifter is silicone, not ordinary rubber,which is very soft and not harmful for oil paint and can be teared down.
How to Use the Paintless Dent Repair Puller.
1.Clean the dent with a clean wet cloth;
2. Clean the glue sticks with alchole and mount it into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect power source and preheat for 5-8 minutes;
3.Use a proper tab depending on the size of dent.( Large dent requires a large tab. The larger the tab is, the bigger force that requires);
4. Pull the trigger and apply the plastic tabs  with extruded glue (The holes of tab should be fully filled with hot melt glue);
5. Fast place the tab with glue at the center of dent, press it lightly to make the tab sitck to the dent (Let it cool down for 5- 8 minutes. The actural cooling time depends on actual environment, and it will be slightly shorter in winter);
6. Buckle the lifter with tab, screw the top knob to adjust the height, then hold the handle and gradually increase force to pull up the dent;Do it slowly and patiently.
7. Check with a Line board. If dent still exists,pls repeat above steps until dent is removed.
8. Clean the glue residue with a clean cloth & shovel and alchole.
9.If there is a bugle after repairing, slightly knock it down with a rubber hammer and tap-down pen;