JDSU C4000-LAN ESAM Enterprise Services Module For T-BERD MTS 4000 C4000

Description

ebay template
The Following Items Are Included:
JDSU C4000-LAN ESAM Enterprise Services Application Module (BC# 41088)
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
JDSU C4000-LAN ESAM Enterprise Services Application Module
For Use With JDSU MTS / T-BERD 4000 Mainframes
(Mainframe Not Included In Sale!)
The ESAM provides users with physical media tests including speed-certification of electrical Ethernet cabling, network connectivity tests, discovery, wire-speed deep-packet statistics, and wire-speed protocol capture and expert analysis using unique, in-depth JDSU J-Mentor capabilities
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
JDSU C4000 ESAM Enterprise Services Application Module
Today’s Information technology (IT) networks are more complex than ever with Voice over Internet Protocol (IP), IP security cameras, presence, and remote applications being run over high-speed copper, fiber and wireless infrastructure. Complexity
that was once confined to the data center is now finding its way closer and closer to the user causing the front-line IT technician to need to resolve a far greater range of faults than ever before. With even minor network faults having the potential to render employees unproductive, keeping the network up is now a mission-critical task. The ESAM addresses these challenges of modern networks with a modern approach.
Through its intuitive workflow-based user interface the Enterprise Services Application Module (ESAM) for the JDSU T-BERD/MTS-4000 modular platform provides users with physical media tests including speed-certification of electrical Ethernet cabling, network connectivity tests, discovery, wire-speed deep-packet statistics, and wire-speed protocol capture and expert analysis using unique, in-depth JDSU J-Mentor capabilities.
Test connectivity is obtained either electrically via a 10/100/1000 RJ-45 Ethernet jack or via an SFP for optical Ethernet.
Physical Media Tests
All the features of the JDSU Validator line Ethernet speed certifier are included in the ESAM. Technicians can use the included Plan-Um® software to create cabling layout diagrams and cable test schedules. After loading the job onto the ESAM, the technician can run auto-tests for wiremap, length, signal-to-noise ratio, skew, and bit error rate tests using standard and user-defined cable types. Passing these tests ensures that the cable can support 1000BASE-T. All of the auto tests can also be performed manually as can tone generation and ID-only mapping.
Network Connectivity Tests
Once the physical media has been tested and confirmed to support Ethernet, the technician can test for connectivity to active Ethernet devices on a single drop. If Power over Ethernet (PoE) is supplied, the pins, voltage, and current can be checked to ensure it matches the requirements of the powered device. Port discovery will confirm that the Ethernet interface is advertising the correct speed and duplex options, avoiding optional duplex-mismatch issues. The next connectivity test will attempt to obtain an IP address using Dynamic Host Configuration Protocol (DHCP) (static configuration is also possible). Duplicate IP addresses will be flagged to the user’s attention. Once an IP configuration is obtained, the ESAM can perform Ping, TraceRoute, and Domain Name System (DNS) connectivity tests to ensure connectivity to various network devices. Firewalls can also be tested by Transmission Control Protocol (TCP)/User Datagram Protocol (UDP) connectivity tests to verify that particular TCP/UDP ports are open or blocked. If Cisco Discovery Protocol (CDP) and/or Link Layer Discovery Protocol (LLDP) are used in the network, the analyzer can read these messages and report them to the user. If issues are observed during many of the connectivity tests, the technician can chose to view a capture of all frames sent and received for that specific test allowing in-depth root-cause analysis.
Network Discovery
Once the technician has confirmed basic connectivity to the network, they may have the need to discover what devices are on the network. Using active and passive discovery methods from an individual Ethernet drop, the technician can discovery a wide range of devices both within the users subnetwork and beyond. Presented with a graphical view of the discovered devices, the technician can drill into details about specific network elements. By configuring Simple Network Management Protocol (SNMP) password strings, network devices can be queried and the various details can be viewed by the technician. Any obvious problems in the network will be highlighted to the user.
Once the user drills into details about a specific element they can view details such as MAC/IP addresses. If SNMP is enabled on the network additional information such as interface utilization, packet rates, and errors can be viewed.
Network
Statistics
By connecting to an Ethernet aggregating Test Access Port (TAP) or switch mirror port, the analyzer can gather statistics at full line speed. Utilization statistics can be viewed by link, VLAN, and Subnetwork. Link utilization can be viewed and broken down by unicast, broadcast, multicast, and errored frames. Protocol distribution on the link can be viewed allowing to user to identify what protocols are consuming link capacity. Top-talkers on the link will be identified to the user. Pre-defined and user defined wire-speed packet/byte counters allow the user to view statistics by specific protocols and events.
Packet Capture and Expert Analysis
Hardware-based packet capture ensures that all frames are captured – even at sustained full gigabit line rate. The 1 Gigabyte capture buffer allows for a large amount of data to be captured. Captured traffic is stored in packet capture (PCAP) format and can be analyzed with Wireshark – both on and off the tester. Pre-capture filters and triggers can be applied to ensure that the correct frames are captured at the correct time. Expert analysis via J-Mentor reduces the need to be an expert in analyzing captured data.
Applications:
Perform all-in-one enterprise testing: verify that copper cables support gigabit Ethernet, test network connectivity (from Ethernet interface discovery to Layer 4 Port connectivity), discover network devices both on and off the subnet, collect statistics and analyze network utilization/traffic patterns, and perform wirespeed capture on gigabit Ethernet links
Speed certify electrical Ethernet up to 1000BASE-T
Isolate and resolve Ethernet or IP problems in the field using unique, in-depth JDSU J-Mentor capture and decode capabilities
Features:
Provides Layer 1-7 protocol capture and expert analysis
Offers wirespeed deep packet statistics and analysis
Tests network connectivity
Performs network discovery
Conducts a full range of physical media tests
Offers a workflow-based user interface
Specifications:
Power consumption with ESAM
22 Watts maximum
Cooling with ESAM
3 internal temperature-controlled low-noise fans
Battery Life with ESAM
Approximately 2.0 hours w/Base Unit Li-ion (9-Cell)
Test Ports
RJ-45 for cable test
10BASE-T, 100BASE-TX, 1000BASE-T for Network tests
SFP cage
For SFP modules
LEDs
RJ-45 Link and Activity LEDs
Memory
Capture Buffer
1 Gigabyte
Application
128 Megabyte
Flash
16 Megabyte
Cable Tests
Wiremap
Open Pair
Split Pair
Shorted Pair
Pair Length
Distance to Short
Distance to Open
Pair Skew
Pair SNR
BERT
Tone Generator
Flash link light
Detect Power over Ethernet
Cable Types
Shielded or unshielded twisted pair network cable
Cable Length
100 meters (327 feet)
Cable Length Accuracy
±5% (after performing both unit and cable calibration)
Split Pair Test – Maximum Cable Length
Up to 100 meters (327 ft), depending upon cable type
Network Connectivity Tools
PoE
Discover Network Interface Capabilities
DHCP
DNS
Ping
Traceroute
CDP/LLDP Discovery
Port Scan up to 100 simultaneous Layer 4 port
Network Discovery
Active and Passive Discovery of up to 2000 devices
Discover IP networks, NetBIOS domains and VLANS
Network Statistics
Link utilization statistics (broadcast, unicast, multicast, errored) for up to 8 hours
Discover and track link protocols – 300 protocols supported
Discover link top talkers – displays top 15 hosts
27 built-in link wirespeed packets counters
10 user concurrent link wirespeed packet counters
Perform deep packet inspection of packet payloads at wirespeed
IPV4 and IPV6 support
Subnet utilization statistics on 4 subnets for up to 8 hours
VLAN utilization on 8 VLANs for up to 8 hours
Packet Capture
Capture 1GB of packet data
Pre-capture filters by protocol, IP address or advanced filters
Creates PCAP files for inspection with Wireshark
Perform network analysis using J-Mentor intelligent analysis tool
For full JDSU C4000-LAN product specifications, please click here:
JDSU C4000-LAN
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management