Car Paintless Dent Repair Dint Hail Damage Hail Ding Removal Puller DIY Tool USA

Description

Instructions:
1. Find the concave part and clean it with cleaning cloth and alcohol,
2. Check the shape and size of the depression with the detection board, and mark it with a marker. 3. Select the corresponding glue stick and clean it with alcohol, then insert the glue gun to charge and heat it. 4. Wait for 2-3 minutes, after the glue stick completely melts, apply evenly on the corresponding suction cup, and apply more appropriately.
5. Attach the suction cup to the concave part, wait for 3-5 minutes, when the glue has a little bit of residual temperature (just a little bit of residual temperature), buckle on the suction and extraction repairer, press the handle with hand, gradually increase the force, and press several times until the observation surface is flat or slightly convex, do not operate too quickly
6. Spray alcohol on the glue and remove residual glue with glue shovel.
7. There are some small depressions, the periphery is relatively high, and the middle is relatively deep. Please use the leveling hammer to knock the leg edge, so that these depressions will be relatively smooth, and it is easier to deal with those depressions.
8. Check the repair effect of the depression again. If it is not repaired, please repeat the above steps until it is repaired
Specifications:
Material: stainless steel + plastic
Weight: 432g
Size: 17*13*9CM
Package Include
1 *  Dent Lifter (No adhesive pads)
18 * Car Dent Repair Tabs  Print Tabs With different style
Note:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.