Anritsu MT1000A Network Master Pro Test Set / OTDR - LOADED & CALIBRATED!

Description

Powered by
Frooition
Shop Categories
Amplifiers
Analyzers
Cable & Antenna Analyzers
Cables
Calibration Kits
Calibrators
Counters / Timers
Detectors
Emulators
Error Detectors
Logic Analyzers
Meters
Modules / Plug Ins
Multimeters
Network Analyzers
Noise Generators
Noise Sources
Optical
Optical Spectrum Analyzers
Oscilloscopes
Other
Pattern Generators
Power Meters
Power Sensors
Power Supplies
Probes
RF / Microwave
Service Monitors / Test Sets
Signal Analyzers
Signal Generators
Spectrum Analyzers
Thermal Imagers
VXI
We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Anritsu MT1000A Network Master Pro Test Set / OTDR - LOADED & MFG CALIBRATED!
Item Description
Anritsu MT1000A Network Master Pro Test Set / OTDR - LOADED & ANRITSU CALIBRATED!
You are bidding on an
Anritsu MT1000A Network Master Pro Test Set / OTDR.
This system will arrive with a fresh calibration / conformance certificate provided by the manufacturer.
The compact, battery-powered and easy-to-use Anritsu MT1000A provides everything needed to install and maintain communication networks in a rugged, field portable package. This lightweight instrument simplifies the daunting task of collecting and interpreting data with an easy-to-use GUI and clear summaries allowing users of any skill level to operate the instrument to its full potential.
INSTALLED OPTIONS:
MT1000A: Network Master Pro Mainframe -
54.00
MT1000A-003:  MT1000A WLAN/Bluetooth Connectivity -
.00
MU100021A: OTDR Module 1310/1550/850/1300nm SMF/MMF -
7.00
MU100021A-002: Visual Fault Locator -
8.00
MU100021A-010: UPC Polish -
5.00
MU100021A-021: Enhanced Dynamic Range -
81.00
MU100010A: Base transport module featuring the following interfaces: 2 x RJ48; 2 x BNC Tx/Rx; 2 x Bantam Tx/Rx; 2 x RJ45; 2 x SFP+.  Note module requires protocol option(s) to enable test functionality -
21
MU100010A-001:  Dual channel SDH; SONET; PDH; DSn; Ethernet option up to 2.7G for MU100010A - Ethernet features include: IPv4/IPv6; Y.1564; RFC 2544; BER; Multi-stream; OAM; SyncE; MPLS; MPLS-TP; Stacked VLAN; PBB-TE; Ping/Traceroute; Cable test.  SONET/SDH features includes PDH/DSn testing; Bi-directional monitoring/mapping; Error/Alarm; Performance Delay/APS measurement; Header onitoring/generation; Pointer event generation; Trouble scan; Channel statistics; Frame capture -
43.00
MU100010A-011:  Single channel 10G Ethernet option for MU100010A - includes IPv4/IPv6; Y.1564; RFC 2544; BER; Multi-stream; OAM; SyncE; MPLS; MPLS-TP; Stacked VLAN; PBB-TE; Ping/Traceroute; Cable test -
00.00
MU100010A-020:  RFC 6349 option for MU100010A - provides dual port TCP throughput testing up to 10G based on the RFC6349 standard. Up to 16 TCP sessions can be tested simultaneously as well as connectivity testing to iperf server by emulating iperf client -
80.00
MU100010A-071:  Dual channel CPRI /OBSAI option up to 5G (CPRI rate options 1-5)for MU100010A - provides L1/L2 testing; alarm/error detection; unframed/framed BER; RTD and transceiver information -
07.00
MU100010A-072:  Single channel CPRI/OBSAI option from 6G to 10.137G (CPRI rate options 6-8) for MU100010A - provides L1/L2 testing; alarm/error detection; unframed/framed BER; RTD and transceiver information -
83.00
G0306B: Video Inspection Probe -
75.00
F1ADPTLITA Adapter Kit
Accessories Included:  Line Cord; Stylus; AC charger; Operation Manual on DVD; Li-ion Battery; MT1000A/MU100010A Quick Reference Guide; Soft Bag; Carrying Strap; ESD Box for optical modules; support for connector inspection microscope (VIP).
The MT1000A is multi-function tester that can be configured with an array of transport testing functions and OTDR modules to ensure you have the tools you need today plus the expandability for future technologies – all of which are field upgradeable.
Verify proper fiber installation and fiber loss characteristics are within the specified budget
Fiber Visualizer simplifies testing with an easy to read graphical summary of the results
Ability to toggle between graphical summary and traditional OTDR trace
Specialized testing modes simplify operation
High resolution and dynamic range ensure quick and thorough fiber evaluation
Intelligent analysis software identifies problem splices, connectors and even macrobends
Test multiple wavelengths with a single unit
One button PDF report generation
Standard power meter and light source
Visual fault locator option
Verify fiber end face condition (dust, scratches) and cleanliness with optional connector inspection microscope
Features:
Compact, rugged design provides years of service in the most challenging environments
Large 9-inch enhanced display for easy viewing of results indoors or outdoors
Linux OS provides quick boot up and stable, virus free operation
Easy and intuitive GUI
Simple SETUP, TEST, RESULTS three window operation
Modular design with field installable modules and options maximizes your investment
Wifi/Bluetooth/LAN connectivity
Multiple remote control options including VNC
Comprehensive, customizable report generation
OTDR and 10G transport/CPRI module can be simultaneously installed
Available CPRI RF Measurement Module to display LTE spectrum of CPRI uplink and downlink signals
The MT1000A transport module provides robust Ethernet/IP client service verification using industry recognized benchmark test applications driven by IEEE, MEF & ITU-T standards bodies in an intuitive, easy to use graphic interface. It supports both electrical and optical Ethernet/IP industry standard interfaces from 10Mbps to 100Gbps in a scalable platform configured to your network requirements. The Network Master can generate, monitor, capture and report a variety of Ethernet/IP Client services including voice, data and video services. Also supported are Ethernet, IP, MPLS and PBB-TE packet transport as well as circuit based transport. The Network Master enables you to deliver confidence in your Ethernet/IP client service performance as your network grows and evolves with your business demands.
All-in-one transport tester
- Supports speeds from 1.5 Mbps to 10 Gbps
- Support for current (Ethernet, CPRI/OBSAI, OTN, Fibre Channel) and legacy (SONET/SDH/PDH/DSn) technologies Full suite of Ethernet benchmark tests RFC2544, Y.1564, RFC6349
Simultaneous dual-port measurement at all rates
WLAN*/Bluetooth*/LAN connections
Test reports in PDF, CSV and XML formats
Mobile Base Station and Antenna Installation
Two SFP ports for CPRI interface
Analysis of RF IQ signal frequency characteristics for CPRI data
Transmission of fixed IQ patterns
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 30 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges.
Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out
our other auctions
for more great deals on test and measurement equipment.
Thank you and good luck bidding.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
About Us
About Us
Payment
Shipping
Terms
Returns
About Us
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
Payment
Payment
We accept payment by company check, bank transfer and Paypal (for items valued below 00 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request.  Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
Shipping
Shipping
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
Terms
Terms
All items sold on Ebay come with a standard 14 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment. A complete list of our company terms and conditions can be accessed thru the link below.
Spaulding Surplus, LLC Terms & Conditions
Returns
Returns
Spaulding Surplus typically offers a 14 day right of return for equipment received damaged or non-functional.  However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project.  The verification of product capability is the sole responsibility of the buyer.  PO’s and purchases cancelled due to insufficient instrument capability, buyer’s remorse or loss of order are always subject to a minimum 20% restocking fee.  A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's eBay Shop
About Seller Page
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
More Items!
View more great items
Rohde & Schwarz SFE100 DTV Test Transmitter p/n 2112.4100.02 with Option B90!
&dollar6,450.00
Rohde Schwarz CMW500 Radio Comm Tester - CDMA/GSM/EVDO/LTE/WLAN/WIMAX/GPRF/Win7
&dollar69,500.00
Rohde Schwarz ESIB26 20 Hz - 26.5 GHz EMI Test Receiver w/ Opts B2/B4/B5 - CAL'D
&dollar49,500.00
Teradek Bolt Pro 2000 TX and RX HDMI Video Transceiver Set - MFG CALIBRATED!
&dollar5,950.00
Powered by
Frooition
Frooition www.frooition.com | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.